Merge pull request hathach#2061 from hathach/imx-usbhost

iMX.RT EHCI add dcache support and other fixes + refactor

Author: hathach

.idea/cmake.xml

@@ -84,10 +84,6 @@
 #define CFG_TUH_RPI_PIO_USB   1
 #endif
 
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -133,7 +129,7 @@
 #endif
 
 #ifndef CFG_TUH_MEM_ALIGN
-#define CFG_TUH_MEM_ALIGN        __attribute__ ((aligned(4)))
+#define CFG_TUH_MEM_ALIGN           __attribute__ ((aligned(4)))
 #endif
 
 #define CFG_TUH_HUB                 1

.idea/runConfigurations/rt1010.xml

@@ -263,7 +263,7 @@ static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t c
 
   if (!rpt_info)
   {
-    printf("Couldn't find the report info for this report !\r\n");
+    printf("Couldn't find report info !\r\n");
     return;
   }
 

.idea/runConfigurations/rt1010_nxplink.xml

@@ -131,7 +131,10 @@ void board_init(void)
     freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
   }
 
-  LPUART_Init(UART_PORT, &uart_config, freq);
+  if ( kStatus_Success != LPUART_Init(UART_PORT, &uart_config, freq) ) {
+    // failed to init uart, probably baudrate is not supported
+    // TU_BREAKPOINT();
+  }
 
   //------------- USB -------------//
   // Note: RT105x RT106x and later have dual USB controllers.

.idea/runConfigurations/rt1060_jlink.xml

@@ -57,12 +57,16 @@ if (NOT TARGET ${BOARD_TARGET})
     )
   update_board(${BOARD_TARGET})
 
+  if (NOT DEFINED LD_FILE_${TOOLCHAIN})
+    set(LD_FILE_gcc ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld)
+  endif ()
+
   if (TOOLCHAIN STREQUAL "gcc")
     target_sources(${BOARD_TARGET} PUBLIC
       ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S
       )
     target_link_options(${BOARD_TARGET} PUBLIC
-      "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld"
+      "LINKER:--script=${LD_FILE_gcc}"
       "LINKER:-Map=$<IF:$<BOOL:$<TARGET_PROPERTY:OUTPUT_NAME>>,$<TARGET_PROPERTY:OUTPUT_NAME>,$<TARGET_PROPERTY:NAME>>${CMAKE_EXECUTABLE_SUFFIX}.map"
       # nanolib
       --specs=nosys.specs
@@ -144,6 +148,21 @@ function(family_configure_target TARGET)
     COMMAND ${LINKSERVER_PATH} flash ${NXPLINK_DEVICE} load $<TARGET_FILE:${TARGET}>
     )
 
+  # Flash using jlink
+  set(JLINKEXE JLinkExe)
+  file(GENERATE
+    OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink
+    CONTENT "halt
+loadfile $<TARGET_FILE:${TARGET}>
+r
+go
+exit"
+    )
+  add_custom_target(${TARGET}-jlink
+    DEPENDS ${TARGET}
+    COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink
+    )
+
 endfunction()
 
 

examples/dual/host_hid_to_device_cdc/src/tusb_config.h

@@ -35,8 +35,7 @@
 
 // Debug level, TUSB_CFG_DEBUG must be at least this level for debug message
 #define CDCH_DEBUG   2
-
-#define TU_LOG_CDCH(...)   TU_LOG(CDCH_DEBUG, __VA_ARGS__)
+#define TU_LOG_DRV(...)   TU_LOG(CDCH_DEBUG, __VA_ARGS__)
 
 //--------------------------------------------------------------------+
 // Host CDC Interface
@@ -537,6 +536,8 @@ void cdch_close(uint8_t daddr)
     cdch_interface_t* p_cdc = &cdch_data[idx];
     if (p_cdc->daddr == daddr)
     {
+      TU_LOG_DRV("  CDCh close addr = %u index = %u\r\n", daddr, idx);
+
       // Invoke application callback
       if (tuh_cdc_umount_cb) tuh_cdc_umount_cb(idx);
 
@@ -804,7 +805,7 @@ static void acm_process_config(tuh_xfer_t* xfer)
 
 static bool acm_set_control_line_state(cdch_interface_t* p_cdc, uint16_t line_state, tuh_xfer_cb_t complete_cb, uintptr_t user_data) {
   TU_VERIFY(p_cdc->acm_capability.support_line_request);
-  TU_LOG_CDCH("CDC ACM Set Control Line State\r\n");
+  TU_LOG_DRV("CDC ACM Set Control Line State\r\n");
 
   tusb_control_request_t const request = {
     .bmRequestType_bit = {
@@ -834,7 +835,7 @@ static bool acm_set_control_line_state(cdch_interface_t* p_cdc, uint16_t line_st
 }
 
 static bool acm_set_line_coding(cdch_interface_t* p_cdc, cdc_line_coding_t const* line_coding, tuh_xfer_cb_t complete_cb, uintptr_t user_data) {
-  TU_LOG_CDCH("CDC ACM Set Line Conding\r\n");
+  TU_LOG_DRV("CDC ACM Set Line Conding\r\n");
 
   tusb_control_request_t const request = {
     .bmRequestType_bit = {
@@ -894,7 +895,7 @@ static bool ftdi_open(uint8_t daddr, const tusb_desc_interface_t *itf_desc, uint
   cdch_interface_t * p_cdc = make_new_itf(daddr, itf_desc);
   TU_VERIFY(p_cdc);
 
-  TU_LOG_CDCH("FTDI opened\r\n");
+  TU_LOG_DRV("FTDI opened\r\n");
 
   p_cdc->serial_drid = SERIAL_DRIVER_FTDI;
 
@@ -938,7 +939,7 @@ static bool ftdi_sio_reset(cdch_interface_t* p_cdc, tuh_xfer_cb_t complete_cb, u
 
 static bool ftdi_sio_set_modem_ctrl(cdch_interface_t* p_cdc, uint16_t line_state, tuh_xfer_cb_t complete_cb, uintptr_t user_data)
 {
-  TU_LOG_CDCH("CDC FTDI Set Control Line State\r\n");
+  TU_LOG_DRV("CDC FTDI Set Control Line State\r\n");
   p_cdc->user_control_cb = complete_cb;
   TU_ASSERT(ftdi_sio_set_request(p_cdc, FTDI_SIO_MODEM_CTRL, 0x0300 | line_state,
                                  complete_cb ? cdch_internal_control_complete : NULL, user_data));
@@ -974,7 +975,7 @@ static uint32_t ftdi_232bm_baud_to_divisor(uint32_t baud)
 static bool ftdi_sio_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data)
 {
   uint16_t const divisor = (uint16_t) ftdi_232bm_baud_to_divisor(baudrate);
-  TU_LOG_CDCH("CDC FTDI Set BaudRate = %lu, divisor = 0x%04x\n", baudrate, divisor);
+  TU_LOG_DRV("CDC FTDI Set BaudRate = %lu, divisor = 0x%04x\n", baudrate, divisor);
 
   p_cdc->user_control_cb = complete_cb;
   _ftdi_requested_baud = baudrate;
@@ -1061,7 +1062,7 @@ static bool cp210x_open(uint8_t daddr, tusb_desc_interface_t const *itf_desc, ui
   cdch_interface_t * p_cdc = make_new_itf(daddr, itf_desc);
   TU_VERIFY(p_cdc);
 
-  TU_LOG_CDCH("CP210x opened\r\n");
+  TU_LOG_DRV("CP210x opened\r\n");
   p_cdc->serial_drid = SERIAL_DRIVER_CP210X;
 
   // endpoint pair
@@ -1109,7 +1110,7 @@ static bool cp210x_ifc_enable(cdch_interface_t* p_cdc, uint16_t enabled, tuh_xfe
 }
 
 static bool cp210x_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data) {
-  TU_LOG_CDCH("CDC CP210x Set BaudRate = %lu\n", baudrate);
+  TU_LOG_DRV("CDC CP210x Set BaudRate = %lu\n", baudrate);
   uint32_t baud_le = tu_htole32(baudrate);
   p_cdc->user_control_cb = complete_cb;
   return cp210x_set_request(p_cdc, CP210X_SET_BAUDRATE, 0, (uint8_t *) &baud_le, 4,
@@ -1118,7 +1119,7 @@ static bool cp210x_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_
 
 static bool cp210x_set_modem_ctrl(cdch_interface_t* p_cdc, uint16_t line_state, tuh_xfer_cb_t complete_cb, uintptr_t user_data)
 {
-  TU_LOG_CDCH("CDC CP210x Set Control Line State\r\n");
+  TU_LOG_DRV("CDC CP210x Set Control Line State\r\n");
   p_cdc->user_control_cb = complete_cb;
   return cp210x_set_request(p_cdc, CP210X_SET_MHS, 0x0300 | line_state, NULL, 0,
                             complete_cb ? cdch_internal_control_complete : NULL, user_data);

examples/host/cdc_msc_hid/src/hid_app.c

@@ -33,6 +33,10 @@
 
 #include "hid_host.h"
 
+// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message
+#define HIDH_DEBUG   2
+#define TU_LOG_DRV(...)   TU_LOG(HIDH_DEBUG, __VA_ARGS__)
+
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+
@@ -68,7 +72,7 @@ tu_static hidh_interface_t _hidh_itf[CFG_TUH_HID];
 TU_ATTR_ALWAYS_INLINE static inline
 hidh_interface_t* get_hid_itf(uint8_t daddr, uint8_t idx)
 {
-  TU_ASSERT(daddr && idx < CFG_TUH_HID, NULL);
+  TU_ASSERT(daddr > 0 && idx < CFG_TUH_HID, NULL);
   hidh_interface_t* p_hid = &_hidh_itf[idx];
   return (p_hid->daddr == daddr) ? p_hid : NULL;
 }
@@ -207,7 +211,7 @@ static void set_protocol_complete(tuh_xfer_t* xfer)
 
 static bool _hidh_set_protocol(uint8_t daddr, uint8_t itf_num, uint8_t protocol, tuh_xfer_cb_t complete_cb, uintptr_t user_data)
 {
-  TU_LOG2("HID Set Protocol = %d\r\n", protocol);
+  TU_LOG_DRV("HID Set Protocol = %d\r\n", protocol);
 
   tusb_control_request_t const request =
   {
@@ -246,7 +250,7 @@ bool tuh_hid_set_protocol(uint8_t daddr, uint8_t idx, uint8_t protocol)
 
 static void set_report_complete(tuh_xfer_t* xfer)
 {
-  TU_LOG2("HID Set Report complete\r\n");
+  TU_LOG_DRV("HID Set Report complete\r\n");
 
   if (tuh_hid_set_report_complete_cb)
   {
@@ -266,7 +270,7 @@ bool tuh_hid_set_report(uint8_t daddr, uint8_t idx, uint8_t report_id, uint8_t r
   hidh_interface_t* p_hid = get_hid_itf(daddr, idx);
   TU_VERIFY(p_hid);
 
-  TU_LOG2("HID Set Report: id = %u, type = %u, len = %u\r\n", report_id, report_type, len);
+  TU_LOG_DRV("HID Set Report: id = %u, type = %u, len = %u\r\n", report_id, report_type, len);
 
   tusb_control_request_t const request =
   {
@@ -298,7 +302,7 @@ bool tuh_hid_set_report(uint8_t daddr, uint8_t idx, uint8_t report_id, uint8_t r
 static bool _hidh_set_idle(uint8_t daddr, uint8_t itf_num, uint16_t idle_rate, tuh_xfer_cb_t complete_cb, uintptr_t user_data)
 {
   // SET IDLE request, device can stall if not support this request
-  TU_LOG2("HID Set Idle \r\n");
+  TU_LOG_DRV("HID Set Idle \r\n");
 
   tusb_control_request_t const request =
   {
@@ -367,7 +371,7 @@ bool tuh_hid_send_ready(uint8_t dev_addr, uint8_t idx)
 
 bool tuh_hid_send_report(uint8_t daddr, uint8_t idx, uint8_t report_id, const void* report, uint16_t len)
 {
-  TU_LOG2("HID Send Report %d\r\n", report_id);
+  TU_LOG_DRV("HID Send Report %d\r\n", report_id);
 
   hidh_interface_t* p_hid = get_hid_itf(daddr, idx);
   TU_VERIFY(p_hid);
@@ -430,7 +434,7 @@ bool hidh_xfer_cb(uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t
 
   if ( dir == TUSB_DIR_IN )
   {
-    TU_LOG2("  Get Report callback (%u, %u)\r\n", daddr, idx);
+    TU_LOG_DRV("  Get Report callback (%u, %u)\r\n", daddr, idx);
     TU_LOG3_MEM(p_hid->epin_buf, xferred_bytes, 2);
     tuh_hid_report_received_cb(daddr, idx, p_hid->epin_buf, (uint16_t) xferred_bytes);
   }else
@@ -448,8 +452,9 @@ void hidh_close(uint8_t daddr)
     hidh_interface_t* p_hid = &_hidh_itf[i];
     if (p_hid->daddr == daddr)
     {
-       if(tuh_hid_umount_cb) tuh_hid_umount_cb(daddr, i);
-       p_hid->daddr = 0;
+      TU_LOG_DRV("  HIDh close addr = %u index = %u\r\n", daddr, i);
+      if(tuh_hid_umount_cb) tuh_hid_umount_cb(daddr, i);
+      p_hid->daddr = 0;
     }
   }
 }
@@ -465,7 +470,7 @@ bool hidh_open(uint8_t rhport, uint8_t daddr, tusb_desc_interface_t const *desc_
 
   TU_VERIFY(TUSB_CLASS_HID == desc_itf->bInterfaceClass);
 
-  TU_LOG2("[%u] HID opening Interface %u\r\n", daddr, desc_itf->bInterfaceNumber);
+  TU_LOG_DRV("[%u] HID opening Interface %u\r\n", daddr, desc_itf->bInterfaceNumber);
 
   // len = interface + hid + n*endpoints
   uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) +
@@ -592,7 +597,7 @@ static void process_set_config(tuh_xfer_t* xfer)
       // using usbh enumeration buffer since report descriptor can be very long
       if( p_hid->report_desc_len > CFG_TUH_ENUMERATION_BUFSIZE )
       {
-        TU_LOG2("HID Skip Report Descriptor since it is too large %u bytes\r\n", p_hid->report_desc_len);
+        TU_LOG_DRV("HID Skip Report Descriptor since it is too large %u bytes\r\n", p_hid->report_desc_len);
 
         // Driver is mounted without report descriptor
         config_driver_mount_complete(daddr, idx, NULL, 0);
@@ -763,7 +768,7 @@ uint8_t tuh_hid_parse_report_descriptor(tuh_hid_report_info_t* report_info_arr,
   for ( uint8_t i = 0; i < report_num; i++ )
   {
     info = report_info_arr+i;
-    TU_LOG2("%u: id = %u, usage_page = %u, usage = %u\r\n", i, info->report_id, info->usage_page, info->usage);
+    TU_LOG_DRV("%u: id = %u, usage_page = %u, usage = %u\r\n", i, info->report_id, info->usage_page, info->usage);
   }
 
   return report_num;